UZ CI-160C Acid Corrosion Inhibitor for Supor 13Cr Steel
Product introduction
In the high temperature simulation environment, the ordinary carbon steel acid corrosion inhibitor could not protect the 13Cr or super 13Cr steel effectively. The experiment shows that the sample corrosion is serious and the corrosion rate is far beyond the Standard requirements. So, it need a special corrosion inhibitor for 13Cr or super 13Cr steel during acid treatment. UZ CI-160C is a highly effective 13Cr or super 13Cr steel acid inhibitor at temperature up to 160℃ (320°F).
Technical Index
Appearance | Dark red/Brown liquid | |
Density, g/cm3 | 0.92-1.03 | |
Solubility | 1-4% in water | Soluble |
1-4% in 15% HCl | Soluble | |
pH | 3.0-8.0 |
Application
UZ CI-160C is recommended for use in all concentrations of HCL and HCL/HF (mud acid) mixtures up to 160℃ (320°F). It is better to add UZ CI-160C into the acid during the loading operations to ensure better dispersion.The dosge is dependent on acid type, strength, bottom-hole temperature, contact time, and additional additives.
Recommended Handling
All personnel handling this material must handle it as an industrial chemical, wearing protective equipment and observing the precautions as described in the Material Safety Data Sheet.
Packaging and Storage
Packed in 200Litre drum or 1000 Litre IBC (Tote Tank).
Store in dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames. Store away from incompatibles. Follow safe warehousing practices regarding palletizing, banding, shrink-wrapping and /or stacking.
Copyright © 2017-2020 cld. All rights reserved. 四川优铸新材料科技有限公司 Powered by: dayu